Steering Tie Rod End for 1932 Domestics 1pc Front Right 29413

Important: This is a Remanufactured Part -- you must return your old core for this part to be remanufactured. A core is required.

Steering Tie Rod End for 1932 Domestics 1pc Front Right 29413

Tie rod ends are the final link between your steering system and the wheels. Worn ones mean imprecise steering and uneven tire wear.

• Restore precise steering control and wheel alignment.
• Eliminate front-end shimmy and uneven tire wear.
• Quality ball stud with full grease fitting for long service life.
• Manufactured in the USA from quality steel.

Get precise steering back with our Steering Tie Rod End for 1932 Domestics 1pc Front Right 29413. Order now!

Specifications:

• Material: Steel
• Number of Pieces: 1
• Placement on Vehicle: Front Right
• Part Number: 29413
• Brand: Rare Parts
• Position: Front Right
• Number of Pieces: 1
• Rod Thread: 15/16-18
• Bar Size: 1.332
• RH/LH: RH
• Male or Female: Female
• Large Dia. Taper: 0.736
• Small Dia. Taper: 0.65
• Stud Thread Size: 9/16-18
• Stud Length: 0.6875
• Length Ctr. Stud to End: 3.8125
• Config.: Straight
• Greaseable: Yes
• Dust Boot Included: Yes
• Package Contents: 1 Tie Rod End, 1 Dust Seal, 1 Castle Nut, 1 Cotter Pin, 1 Bolt, 1 Lock Washer, 1 Nut, 1 Grease Fitting
• Vehicle Fitment: Please see compatibility chart or give us a call to confirm

Q: What is a steering tie rod end?

A tie rod end is the pivoting ball joint that connects the steering linkage to the steering knuckle on each wheel. It transmits steering force to turn the front wheels left and right.

Q: What problems does a worn steering tie rod end cause?

Worn tie rod ends cause loose steering feel, front-end shimmy or vibration, uneven tire wear especially on the inner or outer edge, and clunking noises when turning.

Q: Are there other names for a steering tie rod end?

You may see this part listed under different steering terms.

• Outer tie rod end
• Inner tie rod end
• Steering tie rod
• Track rod end
• Tie rod ball joint

Names vary by manufacturer.

Q: Does replacing a steering tie rod end require a wheel alignment?

Yes. Tie rod ends directly affect toe alignment. Anytime a tie rod end is replaced, a wheel alignment is necessary to prevent rapid tire wear.

Q: Any install tips or cautions?

Measure the old tie rod end length before removal to get the new one close to the same adjustment. This helps get the vehicle to the alignment shop without excessive tire scrub. Always use new cotter pins.

Why You Should Ride With Us?

You can purchase this product directly from Collectors Auto Supply, where we specialize in classic car restoration parts and accessories. Finding the perfect part for your classic car can be difficult, and even frustrating. And let us be honest. What makes it worse is a general lack of customer love in the industry. That is why we are here, and that is why we are different. We are car people just like you, and we know what you need. And if we do not already know it, we're listening. So, contact us if you need help finding a part, or have an idea for how to improve our website, or anything else. Or if you want to do it the old-fashioned way, give us a call at 1 (800) 414-4462.